Pulse Output Domestic Rotary Vane Mechanic Water Meter

• Customization: Available
• After-sales Service: Online and Site Support
• Warranty: 3 Year
• Install: H/V
• Medium Temperature: Cold Water
• Level Measurement: B
• Counter Instructions: Analogue
• Nominal Diameter: 15-40
• Application: Civil, Industrial
• Principle: Speed of Water Meter
• Medium Pressure: General Water Meter
• Work Environment: Wet / Dry
• Stucture: Traditional
• Waterproof Level: IP68
• Temperature Class: T30 / T50 / T90
• Pulse Output: Optional
• Certificate: ISO4064
• Transport Package: Export Packing
• Specification: 1/2′′-2′′
• Origin: Henan
• HS Code: 90282010
• Production Capacity: 100000PCS/Month

Product Description

Product Description

(1). Scope of application: The meter will be used for the measurement of cold, chlorinated potable water;

(2). Water Meters should conform to the requirements of ISO 4064, or any other equivalent international standards;

(3). Applicable standards Velocity Type Water Meter (Domestic Water Meter);

(4). Specifications are for velocity, dry, magnetic drive, multi-jet type domestic water meter;

(5). Approved in accordance with the Directive 2014/32/EU;

Tech Parameters

Project	Parameter
Norminal Caliber	Dn15	DN20	DN25	Dn32	Dn40
Range Ratio	R80/R160
Q4 (m³/h)	3.125	5	7.875	12.5	20
Q3(m³/h)	2.5	4	6.3	10	16
Q2(m³/h)	0.05/0.025	0.08/0.04	0.126/0.063	200/100	320
Q1(m³/h)	0.031/0.015	0.05/0.025	0.078/0.039	0.125/0.062	0.2/0.1
Temperature Level	T30/T50/T90
Max Reading	99999m³
Min Reading	0.001m³
Max Permit Work Pressure	1.6MPa
Work Environment	-10℃-55℃,  ≤100% RH
Up Stream Flow sensitivity Level	U10
Down Stream Flow sensitivity Level	D5
Climate and mechanical environment level	B Class
Pressure Loss	≤0.063MPa
Water Proof	IP68

Dimensions

Norminal Size	Lenght MM	Width mm	Height  mm	Connect Thread Case D
15mm	165	98	104	G 3/4 B
20mm	195	98	106	G1B
25mm	225	104	120	G 1 1/4 B
32mm	230	104	120	G 1 3/4 B
40mm	245	125	155	G2B

Features

(1). Wet type and dry type are available 

(2) Mechanical drive, Resistance to exterior magnet interference

(3) Selected high quality materials for steady&reliable characteristic(Cast iron, Nylon, Brass materials optional)

(4) High measurement accuracy, small initial flow.

(5) The maximum allowable working pressure is 1.6 MPa 

(6) The maximum allowable temperature (MAT) of the liquid is 50℃ ( 90℃ optional)

(7) Pressure loss level  P 63 

(8) Upstream and downstream flow field sensitivity level U0D0 

(9) Un-measurable reverse flow

Indicating Erro

The maximum allowable error is ±5% in the low zone from the minimum flow rate (Q1) to the exclusion of demarcation flow rate (Q2). The maximum allowable error is ±2% in the high zone from the exclusion of demarcation flow rate (Q2) to the exclusion of overgrowth flow rate (Q4) 

The Counter and Counter Shield

The counter is designed in such away so that if the counter protective plastic is broken for any reason the counter still cannot be removed from its place, water proof IP68. The counter protective cover is made of NANO NYLON, thickness of not less than ten (10) mm, The meter can resist any water hammers impact.

FAQ

Q1:Can I request to advance the shipment?
A: It should be depends on whether there is sufficient inventory in our warehouse.

Q2: Can your company print our brand logo on your products?
A: With the customer's permission, our factory can print the customer logo on the product. However, the customer needs to provide us with a logo authorization so that we can print the customer logo on the product.

Q3: What are your quality control procedures?
A: We adhere to strict quality control procedures, from product design to the end of the production process, using the most advanced quality control equipment, so that all processes are always in the best state of control.

Q4: Can I request a change in packaging and shipping?
A: Yes, we can change the packing and shipping method according to your requirements, but the cost and difference incurred in the meantime will be your responsibility.

Q5: What are your payment terms?
A: T/T, L/C, and others

Q6: What is the standard lead time for each order?
A: It depends on the number of orders you need to purchase. Normally, we complete the order within 15 days.